Cross-linked Cable Slicer

                          XL-JP400 Cross-linked Cable Slicing Machine

Specification Overview

Cross-linked Cable Slicing Machine complies with the standards of GB/T2951-2008 "General Test Methods for Insulation and Sheath Materials of Electric Cables and Optical Cables" and

the test requirements of standards such as GB12706.1-2008, IEC60502-1:2004, GB11017-2002, IEC60502-1:2004, etc.

It is suitable for large cross-linked cables and control cables, serving as a testing instrument for preparing insulation and sheath samples. It is used in conjunction with thermal elongation tests and tensile tests (producing standard dumbbell-shaped samples) to further evaluate the mechanical and physical properties of the samples, thereby ensuring that the products meet standard requirements.

The working principle is: a motor drives the feed screw, which moves the tool holder back and forth. The tool holder is equipped with a specially designed blade. By adjusting the relative position of the blade and the tool holder, the thickness of the cut sample is determined. Then, the position of the tool holder relative to the sample is adjusted. When the tool holder moves back and forth, it horizontally cuts the required sample.

Cross-linked Cable Slicing Machine uses hardened high-precision dual guide rods and is equipped with a precision transmission square screw, making the equipment operate more smoothly. In addition to retaining the original horizontal cutting and longitudinal splitting functions, it also adds the capability to cut circular cross-sections of cables (optional accessory). The circular cross-section samples cut or planed can be used for measuring thickness, dimensions, and mechanical properties.

Technical Parameters

1) Working length: 400mm.

2) Cutting thickness range: 0.5～2.0mm (scale division: 1mm).

3) Circular cross-section sample cutting range: Φ18 ~ 60mm   

4) Cutting speed: 0.1～330mm/min, adjustable; factory-set speed is approximately 150mm/min.

5) Cutting method: The sample remains fixed while the blade moves horizontally; the tool holder is vertically adjustable within a range of about 60mm, manually adjusted according to the scale.

6) Cutting tools: Longitudinal splitting blade and horizontal cutting blade, each provided with the machine, sharpness level.

7) Electric drive: Imported AC speed control motor, 0.20kw.

8) Power supply: AC 220V/50Hz.

9) Dimensions: Length 1200 × Width 520 × Height 1300mm. 

The Cross-linked Cable Slicing Machine is available in a manual type, capable of both horizontal and vertical cutting.